chitiika Ads

Apply to be a Chitika Publisher!

Tuesday, September 18, 2012

System failure due to CPU fan not working properly?


My computer wont boot up properley and it is closing down after a couple of seconds saying the above. I have a HP Pavillion PC. The CPU fan is working and not making any strange noises, I have tried using the steps recommended by HP but they arent working the system keeps shutting down beford it boots up for me to do anything..

This is easy to fix, your fan has too much junk like dust and lint collected on it if you take a small screww driver open the back and just dust off the fan with a light brush it should work like new again
just like a fan in your living room the cpu fan collects dust and too much clogs it up,
remember the dust is going to fly everywhere so don't dust it off on your bed, i used an old paint brush i had lying around and it worked just fine just remember to be gentle and carefull because there is a lot of sensitive stuff back there... this should work if you have anymore probolems feel free to ask anything else.

Check these three:


1. CPU fan
2. CMOS Power Management
3. Power connection of your CPU fan
Inside CPU



Inside Casing

How i can full format my computer using bootable cd?



If you use the Format command or use the Disk Parition utility which comes during XP Installation the Hard Disk would be formatted but by using some tools Files can be recovered.

If you want to completely remove all the files from the Hard Disk you need to do a Zero fill.

You can go to seagate.com and download the ISO version on Disk Manager software burn it on a CD and boot the system using the Created Disk Manager Disk.

You would have an option in utilities to Zero fill the disk. it will take long but would wipe the entire data beyond recovery.


How to hide a folder using command prompt in window??





Follow this steps:
1. Open Command prompt by start–>Accessories—->Command Prompt and use cd.. and cd\commands to navigate to your goal folder.
2. Type this command "attrib +s +h +r folder name" in command prompt.
Now your folder is hided :)

OR Simply Hide folders By right clicking folders and files and go to properties and set it hidden..

 

Self-check Is your computer free from Viruses??

Is your Computer free from virus??

Do u have an anti virus??But can`t trust it!!


So Check your self~
1>GO to tools menu at the top,see whether there is folder options or not..If there is no Folder options then Be sure that you Got viruses & threads in your computer or laptop.
2>While inserting an external device Check whether Autoplay Appers Or Not??If not then be sure u have viruses.
3>While using my computer Does many of the new windows arrise every time you click the folders??If yes then u need a doctor.
4>If your name of folder and files are written in an unknown language then It might be work of some viruses.
5>If you have difficulties in operating your computer like some of your programmes opens automatically with out you click it then viruses are on war with you..
6>Does your files and folders delete automatically??This maght be a serious problem..Install a new Anti-Virus and format your Pc setting back ups..
-->
checking all of the above tips might make you aware about the harms of virus and stay away from voruses..

Fix My PC or Laptop

Hi, friends u r welcomed to pc problem solver page.What type of problem do you have????


MY pc doesn`t open when i turn it on??
 The problem doesn`t seem too big.Following tips might help you in solving your prolem
1>Check your external input(i.e.Extension cords)
2>Does ur moniter blinks and shuts down??
3>check your RAM once.
4>Essembling might fix it( Open your CPU and take your RAM out,Again insert it in same position as it was before)
5>If your moniter opens, then it isn`t your RAM problem..The problem might be your Windows.
6>Press f2 when your computer is turned on.Check the Bois settings..It might be your solution.
7>The cord connected with cpu and moniter check it once.OPen the wire and put it again..Doing it more than 5 times may solve your problem.
8>Still your problem not solved??Then your harddisk might be the problem..Open the long wire connected with mother board and hard disk.Stretch it..And again connect it.
           Caution:If u dont know much about hardware then open your cpu only in presence of Experts
-->

               Remove Windows not genuine??

If your Window XP is not genuine and you want to make it genuine then there is a simple tip for you. This is free and  no need to pay a single penny for making your Window XP genuine. Use the features of a full version and enjoy a genuine windows for free.
follow the below steps to make windows XP genuine.

How to Make Windows XP Genuine

1:- Open NotePad from Start Menu and paste the following code in your notepad program.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersion]
“CurrentBuild”=”1.511.1 () (Obsolete data – do not use)”
“ProductId”=”55274-640-1011873-23081″
“DigitalProductId”=hex:a4,00,00,00,03,00,00,00,35,35,32,37,34,2d,36,34,30,2d,
31,30,31,31,38,37,33,2d,32,33,30,38,31,00,2e,00,00,00,41,32,32,2d,30,30,30,
30,31,00,00,00,00,00,00,00,86,56,4e,4c,21,1b,2b,6a,a3,78,8e,8f,98,5c,00,00,
00,00,00,00,dd,da,47,41,cc,6b,06,00,00,00,00,00,00,00,00,00,00,00,00,00,00,
00,00,00,00,00,00,00,00,00,00,00,38,31,30,32,36,00,00,00,00,00,00,00,b5,16,
00,00,83,83,1f,38,f8,01,00,00,f5,1c,00,00,00,00,00,00,00,00,00,00,00,00,00,
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,66,e5,70,f3
“LicenseInfo”=hex:33,b7,21,c1,e5,e7,cd,4b,fd,7c,c6,35,51,fd,52,57,17,86,3e,18,
d3,f4,8c,8e,35,32,7b,d1,43,8d,61,38,60,a4,ca,55,c9,9a,35,17,46,7a,4f,91,fc,
4a,d9,db,64,5c,c4,e2,0f,34,f3,ea
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWPAEvents]
“OOBETimer”=hex:ff,d5,71,d6,8b,6a,8d,6f,d5,33,93,fd
2. Now save the file on the name of Genuine.reg (Make sure to save it with .reg extension.). Save the file on Desktop
3:- Now close the file and go to Desktop and double click on the file you just saved.
4:- Guys your Windows XP is now genuine. Restart your windows and that’s it.

Second Method

If you are not lucky and the above method is not working for you then don’t worry you can try this one.
1. Download this file
2. Extract it and open the file.
3. Now go to genuine microsoft software and click on the button “Validate Windows”
4. Done


MORE ON THIS SITE..UNDER CONSTRUCTION..STAY CONNECTED...THANK YOU